Heatmiser neoAir V3 Thermostat

Description

Product Description

Enhance your heating system control with the cutting-edge Heatmiser Neoair V3 wireless smart thermostat. After pairing it with the Neohub, this smart set offers a simple way to remotely manage the temperature of your home.

Our smart Heatmiser Neoair V3 is for sale at an affordable cost. It provides flexible control options, including a combination of both functioning as a timer and a smart thermostat to operate your heating and hot water systems efficiently.

• Best for water heating
• Temperature air sensor
• Wireless

What’s in the Box?

1. Heatmiser NeoAir Thermostat v3 (Glacier White)
2. NeoAir Stand

Features of Heatmiser Neoair V3

• Simple Navigation: The neoAir V3 boasts an easy-to-use programming system. All settings are neatly laid out on the backlit screen for effortless control and navigation.
• Self-Learning Preheat: Adjusts heating schedules based on your habits and home conditions, ensuring optimal comfort while saving energy.
• Mesh Networking: Allows seamless wireless connectivity between neoHub and neoAir V3, with neoStat enhancing signal range as a repeater.
• Battery-Powered: Operates on batteries for flexible thermostat placement without needing wires.
• Backlit Display: It guarantees that the temperature and settings are readable in dim light.
• Additional Functions: Features include wireless switching, frost protection, floor sensing mode, temperature hold, air sensor connection, and customisable display modes.

Technical Specifications of Neoair V3 Thermostat

• Dimensions (L x H x D): 86 x 86 x 26mm
• Max Current: 3A
• Temperature Range: 5-35C
• Supply: 4 x AAA Batteries
• Heating Levels: 4
• IP Rating: IP20

How to Install?

• Using a small flathead terminal driver, carefully insert it into the slots on the thermostat’s bottom face to separate the front part from the back plate.
• Use the back plate as a template to mark the positions of two holes on the wall.
• Once the holes have been drilled at the appropriate locations, fit a wall plug into each hole.
• Attach the thermostat’s rear plate firmly to the wall with screws.
• Reattach the thermostat’s front by clipping it to the back plate.

Important Precaution

• Installing close to a direct heat source should be avoided as it will impair functionality.
• Avoid pushing too hard on the LCD panel, as this could break it beyond repair.
• The surface mount installation of this wireless thermostat is intended.

Contact Us

We offer Heatmiser Neoair V3 for sale at cost-friendly prices. Contact us today to get top-notch quality Heatmiser.

FAQs

How can I pair my NeoAir V3 Heatmiser?

When you press and hold the pair button for 5 seconds, the RF-Switch is in pairing mode. The pair light will begin to flash and go out as soon as the RF-Switch picks up the pairing signal from the NeoAir. Pairing is finished.

What distinguishes the NeoAir V2 from the V3?

The NeoAir V3 features physical buttons instead of the Touch buttons found on the NeoAir V2. Other than that, both will operate in the same way.

How long does the Heatmiser Neoair v3’s battery last?

The Heatmiser Neoair v3’s battery is expected to last 14 months; however, this will vary based on the batteries’ age and condition.